Networked Lighting Controls for Installers
Thursday, June 21, 2018 - 8:00am to 5:00pm
31 slots available
Event Benefits:
Who Should Attend:

Building Owners, Managers, Consultants, EVERSOURCE Engineers, NGRID Engineers, Electrical Engineers, Utlity Vendors, and all those interested in Advanced Lighting Systems.


Duration 1. Introduction
0:30 a. Learning objectives
b. Review of lighting controls’ prevalence
c. Historic barriers to adoption
d. How the industry has adapted to these barriers
i. Integrated sensors and controllers
ii. Wireless communication
iii. Improved user interfaces
iv. Integrated power metering
0:30 2. Control Strategies
a. Time scheduling
b. High-end-trim
c. Daylight harvesting
d. Occupancy / vacancy sensing
e. Personal control
f. Demand response
g. The accumulated effects of combining control strategies
0:45 3. Types of Lighting Controls and their Pros/Cons
a. Stand-alone controls
b. Low-voltage relay panel systems
c. Stand-alone fixture-integrated sensors
d. Room-based controllers
e. Simplified networked systems
f. Comprehensive networked systems
0:15 4. Application Guidance
a. How to find and search the DLC QPL for NLC systems and functions
b. General criteria for choosing among NLC
c. How to think about payback on an NLC project
0:15 Break
1:15 5. Networked Lighting Controls application examples
a. Floor plan and project estimation implications of varying networked control systems, including
i. Simplified, wireless, LLLC sensors
ii. Simplified, wired, standalone sensors
iii. Comprehensive, wireless, LLLC sensors
iv. Comprehensive, wired, standalone sensors
b. Labor, termination count, and wiring feet required for each NLC type in a reference design
0:30 6. Application Workshop
a. Floor plans and customer-intent descriptions for five different situations, from new-build Class A office space to retrofit of cold-storage
b. Discussion prompts based on these situations
0:30 Lunch break
3:00 7. Hands-on workshop
a. Identifying components of the NLC
b. Commissioning NLC components
c. Adjusting NLC settings via software
d. Observe and consider NLC interactions with emergency lighting provisions
e. Reset NLC components back to factory default mode
1:00 8. Staff clean and pack equipment

Tools & References:

All materials will be available in class.

Steven Mesh, LC, IESNA & Kandice Cohen
Workshop Cost:
Registration Details:

Payment by credit card online or by check at door.

Checks will be accepted at the door.
Make checks payable to: University of Massachusetts-Amherst

University of Massachusetts Department of Mach. & Ind. Engineering
160 Governors Dr. Amherst, MA 01003-9265
Attn. Alberto Morales

Hosted by:

Sponsored by:

Supported by: